[ROOT]
language = English

a = About
b = Bass
c = Configure
cu = Customize...
cpy = Copy Channel
d = Dual
dsp = Display
e = Error
hw = Hardware
m = Mid
o = Open
off = Off
pas = Paste Channel
q = Quit
r = Routing
s = Save
w = Warning
f = File
t = Tools
h = Help

ap = Admin Password
ar = Access Rights
bm = Bridge Mono
bp = Backup Presets
cc = Copy Channel
cp = Change Password
di = Dimmed
dgt = Delete Group
do = Delayed Off
dp = Developer Password
du = Display Update
ed = Edit
ep = Enter Password
fu = Firmware Update
gp = Global Passwords
ha = Hide Always
hd = Hardware Detection
hl = Hardware Log
ip = Invalid PIN.
iu = Interface Update
iw = Invalid Password
lf = Lock Failed
lp = Load Preset
lu = Lock Unit
ns = Network Settings
om = Output Mode
on = On
op = Output
pp = Preset Passwords
rf = Read FIR
rp = Restore Presets
sa = Show Always
sd = Status Details
sh = Show / Hide
sl = Show Log
sm = Select the models this factory file will support.
sp = Set Pin
sr = Save Preset
tr = Treble
ui = Advanced Configuration
up = User Password

aar = Admin Access Rights
acd = Auto Configure Display
acs = Advanced Configuration
aon = Always on
aof = Always off
apd = Auto Standby
brh = Before restoring snapshot
cfi = Create Flash Image
cff = Create Factory File
cmn = Change Model Number
cnp = Confirm New PIN:
cnw = Confirm New Password:
cpi = Change PIN
dvu = Delete Virtual Unit
ecp = Enter Current PIN:
eif = Erasing Interface Firmware...
efi = Erase Interface Firmware Failed
ent = Enable timer
enw = Enter New Password:
eop = Enter Old Password:
epa = Enter Preset Admin Password:
epd = Enter Preset Developer Password:
epp = Enter Preset User Password:
epu = Enter Global User Password:
etc = Enable Tone Control
fiu = Interface Firmware Update Finished
fmu = Main Firmware Update Finished
fmf = Make Flash Image Finsihed
flf = Load Factory Settings Finished
gar = Global Access Rights
his = Snapshots
hsm = Make a snapshot
hui = Hardware User Interface
ifs = Invalid file size.
ifu = Uploading Interface Firmware
lar = Locked Access Rights
lfi = Load Factory Settings
lff = Load FIR Filter
nhi = Empty
ocp = Auto Configure Primary Display: All primary display key, LED and VU meter settings will be reset. Continue?
ocs = Auto Configure Secondary Display: All secondary display key, LED and VU meter settings will be reset. Continue?
olu = Output Limiter Unit
par = Preset Access Rights
pon = Power On
pof = Power Off
res = Restore
rhm = A new snapshot will be made and all variables will be restored from the selected snapshot. Continue?
rht = Restore previous snapshot
siu = Preparing Interface Firmware Update...
sfu = Preparing Main Firmware Update...
sha = Automatic
slm = Set Library Mask
smht = Create Snapshot
smhm = Comment:
sts = Switching to Standby...
tui = Set Timer
tt1 = Tick the box for each 30 minute time slot
itwf = Update Interface Firmware Timeout: Write Failed
uar = User Access Rights
uif = This model is not supported.
carp = Clear All Read-Only Presets
caup = Clear All User Presets
ropr = Read-Only Preset Range
uis = Hardware User Interface Setup
vfv = Verifying Firmware Version...

cm202 = Change Access Rights for User level
cm203 = Change Access Rights for Locked level
cm212 = Change Access Rights for Admin level
cm213 = Change Access Rights for Developer level
cm215 = Power On Preset
cm404 = Go to Standby
cm900 = Digital -> Analog Failover

nm205a = Change Software Password
nm205b = Set Software Password
nm207 = New Group
nm208 = Open Group
nm209a = Enter Demo Mode
nm209b = Leave Demo Mode
nm210a = Enable Update
nm210b = Disable Update
nm211 = Request Support
nm218 = New Project
nm219 = Open Project
nm220 = Save Project
nm230a = Use High DPI Display
nm230b = Use Scaled DPI Display
nm301 = Window
nm602 = Firmware Update All Units
nm666 = Select Background Image
nm668 = Remove Background Image
nm667 = Enter Password for all units

aar2 = Administrator Access Rights: Enable access for the administrator by checking the checkbox per function.
apdc = Set the delay time before the unit goes to standby when no signal is present (minutes). A value of 0 disables Auto Standby.
apl = A preset is already loading. Please wait for the process to finish.
aslp = Warning: Any unsaved changes will be lost. Continue?
clp1 = All groups and virtual units will be deleted. Continue?
clp2 = All groups will be deleted. Continue?
cpf = The confirmation password must be identical to the new password. Confirmation Failed.
dar = Developer Access Rights: Enable access for the developer by checking the checkbox per function.
dgm = This group will be deleted. Are you sure?
dlm = The log will be cleared. Continue?
dvud1 = The virtual unit
dvud2 = will be deleted. Continue?
enp = Enter a new 4-digit PIN. To disable the PIN, set the value to '0'.
exs = All units in the group will be switched on. Continue?
ilc = This path contains characters that may not be supported on all operating systems and may lead to errors.
ifvf = The Network Interface firmware of this unit does not support creating Flash Images and needs to be updated. Please click Hardware - Update Interface.
ifvn = The Network Interface firmware of this unit does not support Open Interface and needs to be updated. Please click Hardware - Update Interface.
fpn = Floating point numbers must be between -1 and 1, found
gne = This group is not empty! Continue?
gts = All units in the group will be set to standby. Continue?
lar2 = Locked-State Access Rights: Enable access for the end user AFTER locking the unit (Hardware - Lock Unit or via LCD display) by checking the checkbox per function.
lfd = To load a file, click OK. To load a directory, click Cancel.
lffd = You can load a single FIR file or a directory containing multiple FIR files. The filename must contain the string "(0,c)" where c is the channel to load the FIR filter on, starting with 0 for input 1 or 128 for output 1. e.g. "(0,130) myFirFilter.txt" or "myFirFilter (0,130) is this.txt" to load myFirFilter on output 3. If this is omitted, the channel will be the last selected channel.
lffic = The selected channel does not support FIR. Please modify the file name or select a valid channel.
lffnc = I Could not identify any channel, and no channel has been selected. Please modify the file name or select a valid channel.
lffmt1 = This filter contains more taps than available. The length of the loaded filter is 
lffmt2 = taps and will be reduced to
lffmt3 = taps. Continue?
ltcf = Hide By Channel Flag (Priority)
lu1 = The unit will be locked and can only be unlocked with the correct password (Hardware - 
lu2 = ). Continue?
nce = This unit is not connected. Please try again later.
nns = This unit does not support network settings.
nsa = You do not have sufficient access rights to change this value.
nsa2 = Saving program data failed. You do not have sufficient access rights to run this program. Please contact your system administrator.
nsaar = You do not have sufficient access rights to change the Administrator rights.
nsap = You do not have sufficient access rights to access this panel.
nsc = You do not have sufficient access rights to change the password.
nsd = You can get IP settings assigned automatically by DHCP if your network supports this capability, or (if no DHCP server is found) the network will be configured automatically by your DSP units. Alternatively, you can set a fixed IP and subnet mask.
nsdar = You do not have sufficient access rights to change the developer rights.
nslar = You do not have sufficient access rights to change the Locked level rights.
nsp = You do not have sufficient access rights to open presets.
nsr = You do not have sufficient access rights to change the routing.
nssp = You do not have sufficient access rights to save presets.
nsuar = You do not have sufficient access rights to change the user rights.
pnm = PIN does not match (Confirmation Failed).
ppc = Please power cycle the unit.
ppl1 = The programmed preset location
ppl2 = for
ppl3 = is a read-only location. Click OK to save this preset to another location.
ppm1 = Preset location
ppm2 = currently holds the preset
ppm3 = . Do you want to overwrite it?
psc = Please select a channel first.
rwt = Routing
rwm = Changing the routing will affect channel links and may overwrite settings. Continue?
rcfm1 = All Channel Flag links for
rcfm2 = will be permanently removed. Continue?
rcft = Remove Channel Flags
rstdef = Reset to Default
rstm = Please restart the application for the changes to take effect.
rstt = Please restart the application.
sbcf = Show By Channel Flag
selkeys = Select linked variables
shc = Channel Flags
smb = Mask By Channel Flags
tlp = The password is too long and will be set to
tnp = Type '0' again to disable PIN
uar2 = End User Access Rights: Enable access for the end user by checking the checkbox per function.
ud1 = All settings and presets of this unit will be updated. The update process can have multiple steps; please do not power off the unit or disconnect the network until it is finished. Should the process fail, try again. Please make sure to make a backup of your settings before you continue. All settings and presets in the unit will be erased! Continue?
ud2 = The Ethernet interface firmware of this unit will be updated. Please do not power off the unit or disconnect the network until it is finished. Should the process fail, power cycle the unit and try again. Continue?
wfs = Please wait for the unit to be fully synchronized with the application.
wor = Warning: This preset already exists. Overwrite existing file?
wst = Warning: You are saving the preset as a text file. This file type can not be opened to restore the preset. It is recommended to save it as a preset file as well.

monday = Monday
tuesday = Tuesday
wednesday = Wednesday
thursday = Thursday
friday = Friday
saturday = Saturday
sunday = Sunday

uccc = Channel configuration
ucar = Audio routing
ucoc = Output Configuration
ucdi = DC in
ucdo = DC out
ucai = AC in
uck = Keys
ucgpi = GPI
ucl = LEDs
ucv = VU meters
ucgs = General Settings
ucps = Product setup
ucn = Network
ucds = Display Selection
ucst = Set Timer


auto = Automatic
installed = Installed
notInstalled = Not Installed